Products

New Products

Arcus Assyrian Laminated Bow

£315.00

Bow Details

Laminated construction generally using ash and other exotic timbers
Can be shot both RH and LH
Clear laquer finish-As these are hand crafted, designs, colours and patterns may vary from the photo shown
Draw Lengths up to 32 inch
Easy to shoot and comfortable to handle
Good speed and performance
Bow bag and string keeper included
Lightweight in the hand
A good bow for hourse archery.
find out more

Parts of the BOW

INSTRUCTIONS for ASSEMBLY of the BOW

(1) Distinguish the upper limb from the lower limb ( the lower limb has the length of the bow and the draw weight marked on it this limb should always be the lower one )

(2) Fit the upper limb into the socket then the lower limb into bottom socket tighten both limb bolts ( They only need to be hand tight )

Putting the string on the Bow ( Stringing the BOW )

We recomend that you use a stringer because this is a difficult operation.

(1) Put the bigger loop of the string over the top limb.
(2) Put the other end of the string on the lower limb tip.
(3) Take the bowstringer and put the small cap on the lower limb tip.
(4) Then put the other end on the top limb.
(5) Hold the handle (called the riser ) then stand on the stringer holding the stringer on the upper limb to stop it slipping.
(6) Then pull the handle vertically to bend the bow and hold the cap tightley while doing so.
(7) When the limbs are sufficiently bent, let the string slide up onto the notch on the tip of the limb

YOUR BOW IS THEN STRUNG